Is It More Cost-effective Than Ohm AIO? Ohm Vape MP60 Kit 1300mAh

This time we’ll be covering the MP60 by Ohm Vape. It is very simple in appearance and only available in one color option, but that doesn’t make it a mediocre mod pod kit. You can get it from vape online shops if you like. Ok, let’s dive in for more details.

Ohm Vape MP60 Kit presents a flat form factor overall. Powered by a built-in 1300mAh battery, it is driven by a brand new chipset that allows output from 5-60W and a myriad of safety protections. The whole device is activated via a fire button on the control face, below it is a display screen with vertical vape data. To navigate the menu, there are 2 adjustment buttons near the bottom. Charging is performed via a micro USB port on the bottom of the device, a full charge only takes around 2 hours, not too long.
Ohm Vape MP60 ReviewAs for the pods, there are two types included in the kit. Both of them can store up to 3.7ml and are refilled via a side filling port. The difference is the coils they use, one pod is prefilled with an MP Mesh 0.4ohm coil and the other is prefilled with a 0.6ohm coil. Obviously, these pods are designed to meet different vaping needs. At last, there seem to be no airflow adjustment components on MP60 Kit, but you can control the airflow by covering the air inlets on the with your fingers, not too bad. Just give it a shot!

You may also like:
rpm80 smok near me
gearvita.id

Parameters as below
Size: 109.5mm * 33mm * 18mm
Battery: Built-in 1300mAh
Weight: 76.5g
E-liquid capacity(Empty Pod): 3.7ml
Output Mode: Watt
Output wattage: 5W-60W
Output voltage: 0.5V-4.1V
Input voltage: 3.2V-4.2V
Charging Current: 600mAh(Max)
Charging Voltage: 5V
Overcharge Voltage: 4.3V
Over-discharge Voltage: 2.4V
Standby Current: <50uA
Firing Time: 0.001S
Resistance Range: 0.4ohm-3.0ohm

Related blog: What Are The Advantages Of Lost Vape Prana Kit?

What Are The Advantages Of Lost Vape Prana Kit?

The past 2019 is no doubt a year for mod pod kit, and I think this trend will continue in 2020. Today let’s check out the Prana Kit by Lost Vape, also the first device by them in 2020. You can get one from vape online stores if you like it.

Lost Vape Prana Pod Kit looks stunning with a mix of polished acrylic and textured leather. It gains power from a built-in 500mAh Li-Po battery and allows three levels of output, including 9W, 10W, and 12W. To activate the device, all you do is simply inhale on the mouthpiece. Output adjustments are performed by a rounded button on the side of the device, and charging is done via a micro USB port on the bottom. Below the output adjustment button, there is a three-color LED indicator light to show the battery level. At last, Prana also comes with short-circuit protection, temperature protection, low/high resistance protection, and weak battery protection for safer vaping.
Lost Vape Prana CheapMoving on to the pod, you can get two from the kit. They are refillable via a side filling port and have a maximum capacity of 1ml. It’s easy to check the juice level in the pod without pulling it out as there is a transparent view window on the side of the device. Inside the pod is an integrated 1.2ohm coil head, it is obviously prepared for e-juices with moderate or high nicotine content. Overall, you might as well give the Prana a shot if you are a high nicotine lover and looking for a reliable MTL device.

You may also like: grimm kit near me

Parameters as below
Dimension: 66.8mm x 41.4mm x 14.2mm
Material: Zinc Alloy+Acrylic+Leather
Weight: 70g
Battery Type: 500mAh Li-Po battery
Wattage: Max 12W output (Full-power outputs)
Pod Capacity: 1.0ml
Resistance: 1.2ohm
Filling: Side filling
Charging Port: Micro USB port
Connection: Magnetic Pod Connection

Related blog: A True Alternative To Cigarettes | Posh Disposable Pod Vape Devicce

A True Alternative To Cigarettes | Posh Disposable Pod Vape Devicce

This time we’ll be covering the Posh Disposable Vape. If you are looking for an easy to use disposable pod, then you shouldn’t miss out on it. Just buy from vapesourcing cheap vape store online if you are interested. Ok, here we go!

Posh Disposable Vape features a metallic finish and a range of flavors. Like many other disposable vapes, the colors of these pods are also themed to their flavors and there are totally nine options to choose from. Powering the device is a built-in 280 mAh battery, it cannot be recharged but allows for 400 puffs approximately, not bad for a battery of this capacity. The whole device is draw-activated and it’s no way to adjust the wattage, temperature, or airflow, so there are no buttons on it.
Posh Disposable Vape ReviewAdditionally, these pods all come with a blue light. When an inhale is taken, it glows like the embers of a cigarette. It is perfectly normal, and it indicates that the device is functioning within normal parameters. When the light blinks, however, it means that it is close to dying. Each Posh Pod holds 1.8 ml of 6% salt nicotine e-juice, more than enough to last for several days, depending on how often it is used. Moderate vapers may even extend the use to a week. Anyway, the Posh is a good choice for beginners or fans of disposable pods.

You may also like: myle mini near me

Parameters as below
Dimensions: 3-15/16″ x 5/8″ x 1/4″
Flavors: Mango Frost, Cool Mint, Blueberry Ice, Frozen Grape, Cool Melon, Lush Ice, Pineapple Slush, Pink Lemonade, Cotton Candy
E-liquid Capacity: 1.8ml
Nicotine Strength: 60mg
Puffs: 400 puffs/pod

Related blog: A Professional Mod Pod For DTL Vaping-Vaporesso Target PM80 Kit

A Professional Mod Pod For DTL Vaping-Vaporesso Target PM80 Kit

Follow SMOK and VOOPOO closely, Vaporesso released its latest mod pod device – Target PM80. In this article, I’m gonna make a detailed introduction to it. And it is available in vapesourcing online vape shop now, don’t miss out if you like.

Vaporesso PM80 Kit is another pivotal role of the “Target” family. Powering the kit is a 2000mAh internal battery, it can be fully charged in an hour via a 5V/2A micro USB port on the side of the device. Driven by the Axon chip, Target PM80 can fire from 5-80W with 0.001S super-fast firing capability. Moreover, this smart chip will recommend the best power output range for you based on the coil resistance, preventing the coils from burning out. The control face is located on the front of the device, from top to bottom there is a large fire button, a 0.96″ TFT color screen, and two adjustment buttons. With them, you can easily operate and monitor the whole device.
Target PM80 CheapAs to the cartridge, it has a considerable capacity of 4ml and is refilled via a bottom filling port. With purchase, you can get a 0.2Ω GTX Mesh Coil and a 0.3Ω GTX Mesh Coil, both of them are PnP style. Airflow wise, the pod doesn’t have components for adjustment, but you can still tailor the airflow as you want via the air inlets on the side of the device. Anyway, you simply can not go wrong with the Target PM80 Kit.

You may also like: aegis boost near me

Parameters
Size: 102 * 24.8 * 33.4
Battery: Built-in 2000mAh
Power Output: 5-80W
Display: 0.96″ TFT Screen
Charging Port: Micro USB
Charging Current: 2A
Cartridge Capacity: 4ml/2ml(TPD)
Resistance: GTX 0.2Ω Mesh Coil (45–60W)
GTX 0.3Ω Mesh Coil (32-45W)

Related blog: Innovation Beyond Your Imagination | ATVS Sirius Kit 1000mAh

Innovation Beyond Your Imagination | ATVS Sirius Kit 1000mAh

This time we’ll be covering the ATVS Sirius Kit. It not only looks very classy but also features a unique sliding panel design. And it will be available for pre-order soon in vapesourcing online vape store, don’t miss out if you like.

ATVS Sirius Kit is a very compact mod pod system with a gorgeous appearance design. Powered by a built-in 1000mAh battery, it can fire from 5-30W and last a long vaping time. Charging is performed via a micro USB port on the side of the device, but the charging rate is not clear yet. On the front of the device, there is a sexangular fire button, with it you can power on/off the device and fire. The rear of the device is a sliding panel, you will need to slide it aside when adjusting the power output or refilling as the adjustment buttons and pod both hide under it. Between the adjustment buttons and pod, there is also a little OLED screen to show the vaping information.
ATVS Sirius ReviewSpeaking of the pod, it can hold up to 2ml of e-juice and is refilled via a side filling port. Heating elements included with purchase are a 0.6ohm mesh coil and a 1.0ohm regular coil, which are obviously designed for different vaping needs. At last, the pod comes with adjustable airflow design, by rotating the AFC ring at the bottom of the pod you can tailor the airflow to your preference with ease. All in all, you simply can not go wrong with the ATVS Sirius. Just give it a shot!

You may also like: lyra vape near me

Parameters as below
Material: Acrylic + Aluminum Alloy
Size: 50mm(Depth) * 67mm(Height) * 17mm(Width)
Battery Capacity: Built-in 1000mAh
Power Output: 5~30W
Charging Port: Micro USB
Colors: Black, Silver, Yellow, Blue

Related blog: The EU Edition To Stick Prince Baby-SMOK Stick P22 Kit 2000mAh

The EU Edition To Stick Prince Baby-SMOK Stick P22 Kit 2000mAh

Maybe you have used Stick Prince Baby Kit by SMOK before. But have you ever heard about the Stick P22 Kit? This time I’m gonna make a detailed introduction to it. Here is a smok coupon code if you’d like to get one at a better price.

SMOK Stick P22 Kit is the EU edition to Stick Prince Baby Kit. They use the same mods but with different tank capacity. Powering the Stick P22 is a built-in 2000mAh, it can provide a decent power output and a long vaping time. The whole device is operated via a pentagonal fire button, charging is done via a micro USB port on the opposite side of the button. Moreover, there is an LED indicator light surrounding the fire button, it will flash 15 times when the voltage is lower than 3.3V. For safety, the Stick P22 also comes with a range of safety features such as low voltage protection, 8S cut-off, short circuit protection, etc.
Stick P22 ReviewPaired with the mod is the TFV12 Baby P-Tank. It can hold up to 2ml of your favorite e-juice and is refillable via an easy top filling structure. On the top cap, there is also a childproof lock to prevent children from misuse. Evaporators included with purchase are a pre-installed 0.15Ω V8 Baby-Mesh Coil and an extra 0.25Ω V8 Baby-M2 Coil, different coils bring you different experiences. At last, the airflow is adjustable, with the AFC system on the base of the trank, it’s effortless to tailor the airflow to your preference. The whole kit only sells for $13.90 now, just buy yourself one.

You may also like: stick prince near me

Parameters as below
Mod
Size: 22 * 83mm
Battery: Built-in 2000mAh

Tank
Size: 23 * 53.7mm
Tank Capacity: 2ml
Airflow Adjustable: Bottom
Fill Liquid: Top

Related blog: Exquisite Craftsmanship & Ingenious Details-Uwell Crown Kit 1250mAh

Exquisite Craftsmanship & Ingenious Details-Uwell Crown Kit 1250mAh

This year, Uwell has released quite a few decent pod vape devices, such as the Caliburn, Yearn, Caliburn KOKO, and the MarsuPod PCC. And this time they are back again with the new Uwell Crown Kit. In the following, I’m gonna make a detailed introduction to it. For more great vape deals, just check vapesourcing online store.

Uwell Crown Kit reminds me of the Usonicig Zip, probably because they are somewhat similar in design. Powered by a built-in 1250mAh battery, it can be activated either by inhaling or a fire button and has a maximum output of 25W. Charging is done via a micro USB port at the bottom of the device and there is an LED indicator light near the bottom to show the working condition and battery levels clearly. In addition, the integrated BEIN chip also provides multiple safety features including open-circuit indication, short-circuit protection, low power indication, and the over vape indication.
Crown Pod System ReviewAs for the pod of the device, it has a maximum capacity of 3ml. Refilling is effortless thanks to a top filling structure, and there are view windows for you to observe the juice level in the pod. Evaporators with purchase are a 0.6ohm coil head and a 1ohm coil head, which can meet your different needs for Restricted DTL vaping and MTL vaping. Moreover, Uwell’s Pro-FOCS Flavor Testing Technology can completely restore the flavor of e-juice by properly controlling the heating temperature and strictly managing the material quality. Lastly, the airflow is adjustable on Crown Kit via a valve on the side of the pod.

You may also like: aegis boost near me

Parameters as below
Material: Aluminum Alloy & PCTG
Size: 95.6mm x 30mm x 18mm
Battery Capacity: 1250mAh
E-liquid Capacity: 3ml(FDA) / 2ml(TPD)
Filling: Top-fill
Maximum Wattage: 25W
The resistance of Coil: 0.6ohm for Restricted DTL / 1ohm for MTL

Related blog: What Are The Selling Points Of The Talent Vape ECO Kit 1100mAh?

What Are The Selling Points Of The Talent Vape ECO Kit 1100mAh?

We all know that the current vape market is dominated by pod system devices. This time we’ll be covering a new pod mod kit named Talent Vape ECO. Just buy from the vapesourcing vape shop online. Below are more details.

Talent Vape ECO is a well-made pod mod system. Constructed from zinc alloy, it looks very refined and you would find it burdenless to hold in hand. Powered by a built-in 1100mAh battery, it can fire from 5-40W with long endurance. The whole device is operated via a fire button and two adjustment buttons, charging is done by way of a micro USB port at the bottom of the device. To power on or power off the device, all you do is press the fire button five times in rapid succession. In addition, there is a monochrome display screen on the side which will show the output power.
Talent Vape ECO ReviewAs for the pod, it has a huge capacity of 4.5ml and is refillable via an easy top filling port. Heating elements included in the box are a pre-installed 0.6ohm mesh coil and a 1.2ohm ceramic coil, which can meet your different needs for both DTL and MTL vaping. Moreover, the pod is compatible with an RBA coil, this can bring you more DIY fun. The airflow is also adjustable but only when the 0.6ohm mesh coil is installed as there seems to be no AFC ring on the 1.2ohm ceramic coil.

You may also like: orion q pro near me

Parameters
Size: 90 x 41 x 16.8mm
Material: Zinc alloy + PCTG
Battery: Built-in 1100mAh
Power Range: 5 – 40W
Modes: Power / Voltage
Resistance Range: 0.15 – 3ohm
Charging: Type-c port
Pod Capacity: 4.5ml
Coil Resistance: mesh 0.6ohm ( 15 – 25W ), ceramic 1.2ohm ( 8 – 15W )
Connection: Electrode
Color: Blue, Silver, Green, Rainbow

Related blog: The Best Versatile Pod System For Daily Vaping | Oxva Origin Kit 40W

The Best Versatile Pod System For Daily Vaping | Oxva Origin Kit 40W

Are you familiar with the Aegis and Zeus series by GeekVape? In the following, I’m gonna introduce a pod system kit called Oxva Origin. It is strongly related to both series as they came from the same designer. Just buy from the vapesourcing vape store online if you like.

Oxva Origin Kit was designed by Justin Lai – CEO of OXVA. Powered by a single 18650 battery and equipped with the advanced PHOTON chip, it can fire from 5-40W and prevent dry hits. Charging occurs via a micro USB port on the side of the device. The control face is also located on the side, from top to bottom, there is a fire button, an OLED screen, and a navigation button in turn. For safety, there are a multitude of safety features such as timeout protection, short-circuit protection, overcharge protection, over-discharge protection, and over current protection.
Oxva Origin ReviewAs for the pod, it is refillable via a side filling port and you can monitor the juice level via a viewing window on the device. There are many coil options for this pod, besides the 0.5ohm and the 1.4ohm UNI heads included in the box, the pod is also compatible with 0.3ohm UNI head and RBA head, which can effortlessly meet different needs. At last, you can control the airflow by twisting the AFC ring under the pod or blocking the air inlets with your finger under the viewing window. Anyway, the Oxva Origin is worth a shot.

You may also like: fetch mini smok cena

Parameters as below
Size: 32.8mm * 23.5mm * 113.5mm
Battery: Single 18650 battery
Chipset: Photon
Operating mode: VW Mode
Output power: 5 – 40W
Case Material: Metal + Plastic
Coils: 0.5ohm, 0.3ohm, 1.4ohm, and RBA
Port: Micro-USB port

Related blog: A Combination Of AI And Portability | VOOPOO VINCI X Kit 70W

A Combination Of AI And Portability | VOOPOO VINCI X Kit 70W

Do you like the VINCI series by VOOPOO? Are you looking for vape pod kits powered by removable batteries? Why not take a look at the VINCI X? It is exactly what you need!

VOOPOO VINCI X Mod Pod Kit is the latest member in the popular VINCI range. Powered by a single 18650 battery and driven by the new-generation GENE.AI chip, it has a wide power range from 5-70W and can automatically match the power depending on the coil resistance, to a large extent avoiding coils besing burned out. Moreover, the GENE.AI chip will record your vaping habits through a puff curve, it displays your accumulative puffs in realtime on the screen and keeps those records for two weeks. For safety, VINCI X is armed with a myriad of safety features including overtime protection, short-circuit protection, overcharge protection, max power protection, output over-current protection, over-discharge protection, over-temperature protection, and battery reverse protection.
VINCI X ReviewAs for the pod, it has a capacity of 5.5ml and is refillable via a side filling port. Heating elements included in the box for VINCI X are a 0.3ohm PnP-VM1 mesh coil and a 0.6ohm PnP-VM4 coil, both of them can be replaced effortlessly thanks to the “PnP” design. Besides, the pod is also widely compatible with all the other PnP coils by VOOPOO. Lastly, there are two airflow options to choose from, simply rotate the pod 180° will allow you to switch between them. Anyway, the VINCI X is worth a shot.

You may also like: RPM40 Prism Blue

Parameters as below
Mod
Material: Zinc Alloy
Size: 117 * 29.5 * 25.3mm
Battery Capacity: Single 18650
Output Power: 5-70W
Output Voltage: 3.2-4.2V
Resistance: 0.1~3.0ohm

Pod
Material: PCTG
Capacity: 5.5ml
Resistance: 0.3ohm (PnP-VM1); 0.6ohm (PnP-VM4)

Related blog: Classic Comeback: Desire Mad Kit With Brand New Bulldog Mesh Tank